18m ISUZU 700P 4*4 off road hydraulic bucket truck cutomized for Ukraine
ISUZU brand 4*4 LHD aerial working platform truck 18m, adopts ISUZU 700P single row driver cab, 3815mm wheelbase, 4HK1-TC51 ISUZU 190hp diesel engine, ISUZU MLD 6+1 manual gears, power steering, air cut braking, 4Tfront axle/7T rear axle, ABS, air cut braking, 8.25R20 tires*6+1 spare tires, etc.
ISUZU 4*4 LHD 18-meter high-altitude operating vehicle adopts a folding crank arm structure, the operating arm is three-section folding, the working bucket and the turntable have double working positions, up and down operation, electro-hydraulic control, 360-degree rotation, four hydraulic outriggers, inside the working bucket It can control the start and stop of the engine, the boom has a hoisting hook system, the hook lifting weight is ≤900kg, the manned working bucket is 200kg, the steel tool box and the pattern anti-skid platform, and the stainless steel fence.
The chassis hydraulic outrigger balance system is equipped with a two-way hydraulic lock as standard, the working arm cylinder is equipped with a two-way balance valve as standard, and the working arm balance structure is an external balance lever.
The main components of Chengli aerial vehicle hydraulic cylinders, hydraulic tubing, hydraulic locks, balance valves, gear pumps, power take-offs, multi-way valves, etc., all adopt well-known domestic brands. The hydraulic system of the vehicle has stable reversing and flexible and convenient operation; The working arms are interlocked, safe and reliable, to prevent misoperation; H-shaped outriggers have a large span and good stability. The outriggers can be independently retractable and linked. The rear outriggers are equipped with outriggers and flashing lights for operation. When the outrigger is profiled, it sends out a light alarm signal.
The main technical advantages of ISUZU folded truck mounted aerial working platform is as below.
a,The boom and outriggers are made of low-alloy high-strength profiles, no welds, beautiful appearance, and strong resistance to deformation.
b, The working bucket adopts an external mechanical self-balancing design, so that the working bucket is always in a balanced state when working.
c, The working bucket is equipped with night operation lights to make night operation safer.
d, Four hydraulic outriggers, with H-shaped structure, larger bearing surface and higher stability. Each hydraulic outrigger is individually adjustable and can be adjusted according to the working ground environment. Even if the ground is uneven, the whole vehicle can be stabilized by adjusting the outriggers.
e, The rear outriggers of the vehicle are equipped with warning outline lights to improve the safety of warnings during vehicle operation.
f, The working arm is a three-section folding type, with two upper and lower operating systems, and has a double working position of a working bucket and a turntable. Various operations can be completed on the working bucket and on the turntable. The getting on and off are interlocked, and the operation is safe and reliable. The throttle valve is used to achieve stepless speed regulation during the boarding operation. The throttle valve is equipped with a waterproof cover to prevent the valve from getting stuck in rust.
g, The turntable can rotate 360°, using a vertical/horizontal reducer, the torque is larger and safer than the worm gear.
h, The turntable and working bucket are equipped with remote start and stop switches to control the start and stop of the host. When the operating vehicle is parked at the operating point for a long time, the flameout switch can be turned on at this time to reduce fuel consumption, save energy and reduce emissions, and be more environmentally friendly and economical.
i, The hydraulic system is equipped with a hydraulic locking system, whose function is to lock the cylinder in place after reaching the required position to prevent accidents.
j, Use manual and electric integrated dual-purpose electromagnetic electric control multi-way valve to ensure that even if the circuit fails, the
Manual operation can be used to ensure the safety of personnel working at heights.
k, Steel toolbox and pattern anti-skid platform, stainless steel fence, beautiful layout, stable operation and maintenance convenient.
More pictures of ISUZU 4*4 190hp aerial working platform truck 18m customized for Ukraine are as below.
ISUZU 700P 4*4 LHD aerial working platform truck for sale
High quality and best price ISUZU overhead working platform truck 18m for sale
High quality ISUZU off road hydraulic bucket truck 18m for sale
main technical parameters of ISUZU 4*4 LHD aerial working platform truck manufactured by Chengli Group is as below.
Truck modelCLW5070JGKZ3
Main parameters of the whole vehicleDriver cabSingle row, Reversible
Truck chassis modelEQ1090
EnginemodelRated power（KW/hp）
CY4102C3C88/120
Overall dimension(L*W*H)（mm）8600×2200,2320×3200,3350
Total mass（kg）7400Curb mass（kg）7205
wheelbase（mm）3800
Front/rear suspension（mm）1130/2470,1130/2360
Structure
and
special
parameters for the upper bodymax working height（m）18.5m
Working range at the max working height（m）2.3m
Max working range（m）8.2m
Working height at the max working range（m）10.1m
Outriggers typeH type
Outriggers Longitudinal span（mm）4650mm
Outriggers Horizontal span (mm)4220mm,4100mm
Max lifting height(hook centre)（m）8.4m
Max lifting mass (kg)1000kg
Working platform bucket dimension(L*W*H (mm)1200mm×610mm×1100mm
We are a professional manufacturer of aerial platform trucks in china, and we can provide our customers various configuration trucks with different prices. Aerial platform truck is ideal for maintenance of traffic lights, street lights, landscaping trees, clearing of high window and other high aerial works.
Working height : 6m,8m,10m,12m,14m,16m,18m,20m,22m,24m,even 45m, etc. More information, please feel free to contact Ms. Anita Deng. The hot sale line is 0086 13329899995.