Drilling rig truck is also called Water Well Drilling Rig truck, truck mounted drilling rig, vehicle-mounted drilling rig, truck vehicle mounted Water Well Drilling Rig, truck mounted water well drilling rig machine, etc.
Dongfeng furuika Drilling Rig vehicle adopts dongfeng furuika truck chassis, yunnei 150hp Euro Ⅵ diesel engine(client choose Euro Ⅲ/Euro Ⅳ/Euro Ⅴ diesel engine), 3800mm wheelbase, 245/70R19.5 tires *6+1, 6 speed gearbox, with power steering, air cut braking and original air conditioner, etc.
The main upper parts of the truck mounted drilling rig: Reduction Gearbox, Gyrator, winch, gearbox, mud/slurry pump, PTO, derrick, tower frame, water tap, etc.
Brand: Dongfeng
Model: CLW5080TZJ6
Drilling hole diameter: 200mm
Drilling hole depth: 100m
Drilling hole angle range: 90°
Electronic motor power: 105kv
Mass: 7800kgs
Customized: yes
Crushing Mode: Percussive-rotary drill rig
Construction site: Surface drilling Rig
Explorating drilling rig depth: Medium depth drilling hole
Usage: Hydrogeology water well drilling rig
Truck mounted drilling rig for Geological Survey, Geological and mineral exploration drilling rig, North Motor drill, Geological drilling rig.
SCOPE OF USE for the water well drilling rig mounted on truck manufactured by Chengli Special Automobile Co., Ltd. as below.
Used for Construction of seismic blasting hole
Used for Shallow hole construction for general exploration of petroleum, natural gas and solid minerals
Used for Urban Construction, railway and hydropower departments carry out engineering geological survey and construction
Used for Shallow hydrogeological survey and water well drilling.
More pictures of Dongfeng brand 150hp diesel Water Well Drilling Rig truck manufactured by Chengli Special Automobile Co., Ltd. as below. 
HOT SALE! CLW brand water well drilling rig mounted on truck for sale
The technical specification of CLW brand well drilling rig mounted on truck manufactured by Chengli Special Automobile Co., Ltd. as below.
Maximum drilling depth | Drilling hole diameter:ψ200mm at 70m depth Drilling hole diameter:ψ150mm at 100m depth | |
Drilling rod diameter | mm | |
Rotator speed | R/min | Inverse rotating / 57 96 169 |
| Reverse rotating/ 38 | ||
Maximum feed/ Pull-up force | KN | 30/50 |
Feed schedule | mm | 450 |
Hoisting force of single rope | KN | 13 |
Max working pressure of the mud/slurry pump | Mpa | 2 |
Max displacement of the mud/slurry pump | 1/min | 450 |
Max pressure of the hydraulic system | Mpa | 8 |
Overall dimension(L*W*H) | mm | 9100*2370*3180 |
Curb mass | kg | 7800 |