Good quality dongfeng KR 190hp diesel fresh milk tanker truck 304 stainless steel material for liquid food transportation

dongfeng kingrun one row and a half driver cab

4*2 LHD, RHD Optional

4500mm wheelbase

B190 33 Cummins 190hp diesel engine, Euro 3 emission standard

6T front axle/10T rear axle,

10.00R20 tires6*6+1 spare

DF6S900 dongfeng 6+1 gears, manual type

24Volts electricity

air cut braking, air conditioner,etc.

The volume of DONGFENG oil tanker truck is 15000Liters. The transportation medium is liquid food, such as fresh milk, beer, soft drinking, etc. 

Standard devices of dongfeng  4*2 LHD 15,000L milk tanker truck as below.
1， High quality foodgrade 304-2B 4mm thickness stainless steel plate
2， Three-four compartments; every compartment with one self-discharging outlet
3， Every compartment is only with single one PIC cleaning device
4， the temperature will be changed less than 1 degree within 24 hours
5, Insulated layer is with 80mm thickness PU foam.

The milk transporter is also called fresh milk transporter, milk tanker, liquid food transporter. The tank body is made of food grade stainless steel plate. The outer part of the tank body needs to be used as insulation layer to prevent the deterioration of fresh milk. The inside of the tank body needs smooth and no acute angle. A CIP (cleaning device) is added to each milk tank.

The material of the tank is made of high-quality aluminum alloy and stainless steel. The tank and the tank are finely polished. The tank can be equipped with heat preservation and refrigeration functions. It can transport a variety of chemical raw materials, dairy products, oil products and liquid food transportation.

The tank can be set to multiple positions according to the demand, and a variety of media can be dispensed at any time, so that the pump can be pumped in and out, and the table can be over-extended, but the table and the self-flowing table can be used.

Fresh milk transport vehicle modification configuration: the tank structure is divided into three layers: insulation layer, insulation layer and tank body.

Milk tanker truck characteristic :

(1). The milk tank is made up of three layers:outside layer(for physical protection),middle layer(thermal insulation),inner layer tank(for milk filling).

(2). The thickness of thermal insulation layer is 80mm.

(3). The tanker liner is made of high quality food grade stainless steel,and the inner tank has been fine polished.

(4). Equipped with PIC cleaning devices.With function of thermal insulation: medium temperature change≤1°C during 24 hours.

(5). The tank can be divided into several parts according to demand to load different medium.