Factory direct sale good quality electric road sweeping and washing vehicle 17cubic meters for sale 

This pure electric sweeper is a new generation of sanitation product developed by our company. It is modified from the pure electric chassis of the CL1181JBEV type II truck. It has the functions of road sweeping, sweeping and cleaning, and can clean road edges, curb stone facades, front corner sprays, rear sprays, and the high-pressure spray gun can clean road signs and billboards. When a low-pressure sprinkler system is optional, low-pressure front flushing or duckbill flushing can be performed.

Cleaning: The upper motor drives the hydraulic oil pump and fan to work. The hydraulic oil pump drives the left and right sweeping plates to telescope, lift, and rotate. The left and right sweeping disks sweep the garbage on both sides to the bottom of the cleaning truck and in front of the suction nozzle. The fan works to generate high-speed airflow in the air duct composed of the dustbin, straw and suction nozzle. Under the action of the airflow, the garbage is sucked into the suction nozzle and enters the dustbin. The chassis engine drives the sweeper to move forward, and the garbage swept in front of the suction nozzle continuously enters the suction nozzle and is continuously sucked into the dustbin to achieve road cleaning. Cleaning: While the cleaning device is working, the upper motor drives a high-pressure water pump equipped with a special clutch to participate in the work. The high-pressure water pump pressurizes the clean water from the clean water tank and then delivers it to the water spray rod in the suction nozzle and the left and right water spray rods through the high-pressure pipeline control valve. Each spray rod is equipped with multiple special stainless steel fan-shaped nozzles. The fan-shaped water curtain sprayed from the nozzle forms a U-shaped water jet with a total width of not less than 2.8m, which directly washes the road surface. The water after washing the road surface is sucked back into the garbage bin to realize road cleaning. Washing of curbs and curb stone facades: Use the left or right vertical sweep of the sweeping plate, the curb stone cleaning nozzle on the left or right spray bar, and select the left or right sweeping operation mode for cleaning operations, and the left or right side can be cleaned. Or wash the right curb and curb stone facade. Rear spray: There is a spray boom under the garbage bin at the rear of the cleaning vehicle. The spray boom is equipped with multiple spray nozzles. Start the motor and high-pressure water pump, turn on the rear spray switch, and start the chassis truck to move forward to carry out spray dust reduction operations. Low-pressure washing: Use the low pressure and large flow of the self-priming water pump to wash the road surface for use as a sprinkler.

The dust tanker adopts a 304 single-layer stainless steel tile structure design and integrates part of the clean water tank and garbage bin. The garbage bin can be tipped for discharge, with a discharge angle of 480 degrees. The total volume of the garbage bin reaches 8.4m3, and the effective volume is not less than 6m3. The closing and locking mechanism of the rear door of the garbage bin adopts a latch type, which has good stability and good sealing performance. The sewage tank in the garbage bin adopts a large flat slope structure, and the maximum discharge angle can reach 50 degrees, making it easier to dump garbage. The sewage tank is equipped with an anti-overflow alarm and an automatic operation stop device to prevent sewage from overflowing from the suction pipe during operation and causing secondary pollution; the high-pressure self-cleaning device in the sewage tank can automatically clean the sewage tank after dumping garbage.

Fan: It adopts No. 7.1 centrifugal fan customized and developed for new energy sweeper trucks, which has the characteristics of high efficiency, low noise, flat performance curve and wide high efficiency area. The fan speed range is 2200-2900rpm; the flow rate is greater than 11000m3/h, and the total pressure is greater than 9300pa. 4.3 Nozzle device It adopts a central fully floating double suction nozzle and an ultra-wide suction nozzle with a suction nozzle diameter of 180mm. Its built-in long row of high-pressure water spray rods have a small ground clearance and strong water flow impact. It can directly send sewage to the suction port, with less splash during operation and a high sewage suction rate. 4.4 Cleaning device It adopts the structure of "two vertical sweepers in the middle + wide suction nozzle in the middle (built-in high-pressure water spray rod) + left and right high-pressure side spray rods". When the side spray boom encounters an obstacle in front, it can be retracted inward to avoid it, and will automatically return to the normal working position after passing the obstacle. 4.5 High pressure cleaning system The high-pressure cleaning system consists of a high-pressure water pump, a high-pressure piping system, a water diverter valve, a spray rod/nozzle, etc. Used to provide high-pressure water to corner sprays, sweeper spray bars, suction nozzle spray bars, self-cleaning sprays, and hand-held spray guns. The high-pressure water pump adopts a well-known brand plunger type water pump. When the high-pressure water pump is started and the working water valve is switched, the water pump can automatically unload. Protected by safety valves and overflow valves, damage to the high-pressure water pump is effectively prevented. The side and rear are equipped with a mechanical automatic winding washing reel, equipped with a 20m high-pressure hose and cleaning guns at different angles, which can be used to clean the car body and other equipment and facilities.

 hydraulic system.

The superimposed valve group is used to ensure the stability and smoothness of the hydraulic action of the entire vehicle; the gear pump adopts domestic high-quality pumps with reliable performance. A manual pump is added to the hydraulic system so that when the system encounters special circumstances, such as the bodywork power system failing to work normally, the manual pump can be used to complete garbage dumping and reset of each hydraulic cylinder.

The electronic control systemadopting the control mode of "display + controller + CAN bus operation panel". It has the function of starting a job and stopping a job with one button. All operating function modes can be configured and used in any combination. central control screen It is controlled by a 7.0-inch central control screen with touch function, protection grade IP65, and resolution 800*480TFT. Monitor the signal status of proximity switches and sensors; display bodywork fault codes; monitor and display bodywork motor and electronic control parameters; IO manual mode is used when vehicle maintenance and debugging, and the actuator action is not subject to sensor logic judgment.

Voice announcer A variety of voice prompts and music alarms accurately broadcast various safety prompts and fault points. HD surveillance monitor A high-definition monitoring probe is installed on the right sweeping pan and the rear of the garbage bin, and a high-definition LCD monitor is installed in the cab. The screen can be switched to the position of the right sweeping pan and the rear position of the garbage bin respectively. During operation, the working conditions and conditions of the sweeping pan can be monitored. Monitor the quality of the entire vehicle operation.

main technical parameters of electric road sweeping and washing vehicle manufactured by Chengli Special Automobile Co., Ltd. is as below.